ACARP ACARP ACARP ACARP
Open Cut                                          reports

Open Cut

Safety, productivity and the right to operate are priorities for open cut mine research. We have supported work on an automated swing loading system for electric shovels, the science of rehabilitation and minimising mining impacts on neighbouring communities.


Geology (18 Reports)

Characterisation of Overburden Rock Mass and Top Coal Delineation Using Triaxial Drill Bit VSP Method

Get Report
C1902001/05/2014
Author: Shivakumar Karekal, Nobukazu Soma and Toshiyuki Tosha | CSIRO, National Institute of Advanced Industrial Science and Technology (AIST), Japan

Coal loss and coal dilution is a serious problem in open pit coal mines. Poor structural characterisation of rock mass can lead to poor fragmentation which could hamper the productivity of draglines often used in cast blasting to remove the overburden. Coal loss and dilution can amount to ....  read more

 

Coal Spectral Libraries for Scanning Devices

Get Report
C2804501/08/2021
Author: Sandra Rodrigues, Lionel Fonteneau, Joan Esterle & Brigette Martini | University of Queensland

The objective of this project was to create a public spectral library for coal samples, which did not previously exist. To achieve this, coal samples were scanned using commercially available hyperspectral systems in the Visible Near InfraRed (VNIR) from 450 nm to 1000 nm wavelength, ....  read more

 

Feasibility Study to Use Machine Learning for Rockfall Analysis: Stage 1

Get Report
C3304024/03/2023
Author: Anna Giacomini, Klaus Thoeni, Philipp Hartmann, Indishe Senanayake and Jinsong Huang | The University of Newcastle

Rockfalls pose significant risks to human lives, machinery and portal structures located at the toe of highwalls in open cut mines, with the potential for considerable financial losses. An efficient mitigation can be provided when the energy at first impact at the bottom of the affected ....  read more

 

Geological Controls on Fluorine and Phosphorus in Bowen Basin Coals

Get Report
C2602910/03/2022
Author: Brooke Davis, Sandra Rodrigues, Alex Duxbury, Renate Sliwa, Joan Esterle | University of Queensland

Increasing global restrictions on fluorine in product coal prompted this project, using data and samples from the Late Permian Bowen Basin coal measures as case studies. In 2015, few mines had tested for fluorine and modelling of its distribution for coal quality control through selective ....  read more

 

Improving the Reliability of Density and Grade Estimation from Borehole Geophysical Log Suites

Get Report
C1503601/08/2007
Author: Binzhong Zhou, Joan Esterle | CSIRO Exploration & Mining

Project Objectives

Coal density plays an important role in projecting and reconciling coal tonnage and quality variation. The best estimation of coal density is from direct measurement on core, but cored holes are sparse relative to chip holes due to the ....  read more

 

Mapping of Elemental Coal Content for Exploration and Mining

Get Report
C2903001/09/2021
Author: Jane Hodgkinson and Micaela Grigorescu | CSIRO

This project has analysed the concentrations of 50 elements not typically measured in coal in nearly 90 Australian coal samples from Queensland and New South Wales. The project provides the first dataset and map of its kind for Australian coal.

Internationally, alternative coal use is ....  read more

 

Non-destructive Characterization of Borehole Coal Samples Using X CT Technology

Get Report
C2302401/05/2015
Author: Chris Plackowski, Anh Nguyen, Chen-Luh Lin and Jan Miller | University of Queensland, University of Utah

Exploration and development of a new coal mine and mine plan strategy depend on the characterization of borehole coal samples. Their washability characterization is one of the important, well-defined steps to be followed and has been achieved by conducting Float and Sink (FaS) testing as ....  read more

 

Quantitative Elemental Analysis of Major, Minor and Trace Elements in Coal and Host Rocks by Logging

Get Report
C1602903/12/2008
Author: Stephen Fraser, Craig Smith | CSIRO Exploration & Mining

Knowledge of the distribution of major, minor and trace elements in coals and interburden materials is increasingly important. Technological developments now suggest that such elemental distributions may be determined using a downhole logging tool. This study was undertaken to achieve two ....  read more

 

Rangal Supermodel 2015: The Rangal-Baralaba-Bandanna Coal Measures in the Bowen and Galilee Basins

Get Report
C2202825/02/2017
Author: Renate Sliwa, Joan Esterle, Laura Phillips & Steven Wilson | The University of Queensland

This project compiled over 7000 company boreholes supplemented by more than 1000 open file petroleum (mostly CSG) wells to develop a regionally consistent stratigraphy for the Rangal-Baralaba-Bandanna Coal Measures in the Bowen Basin and the Galilee Basin.

 

The results are ....  read more

 

Raw Ash to Yield Relationships

Get Report
C2803308/02/2022
Author: Chris McMahon | McMahon Coal Quality Resources

Correct outcomes in yield predictions for product ash from coal borecore exploration can be critical to resource predictive potential, market evaluation and economic mining outcomes.

An observation has been made over many projects that product yield can be estimated from borecores from ....  read more

 

Structure Supermodel 2017 - Fault Characterisation in Permian to Jurassic Coal Measures

Get Report
C2403201/02/2018
Author: Renate Sliwa, Abbas Babaahmadi & Joan Esterle | The University of Queensland

This report provides a detailed characterisation of deformation overprinting the Permian to Jurassic coal measures of Queensland. It addresses the ACARP objective to improve understanding of key aspects of Australia's coal basins and how they impact on mining conditions, by providing a ....  read more

 

Tertiary Volcanic Fields of Eastern Australia: Regional Characteristics and Implications for Coal Quality and Mining

Get Report
C2202301/03/2016
Author: Charles Verdel and Isabelle Jones | University of Queensland

ACARP project C22023 focused on the influence of Cenozoic basalts on coals of the Bowen Basin and nearby basins in eastern Australia. The project included a compilation of drillhole data, which illustrate regional-scale variations in the thickness of basalts. These thicknesses tend to be ....  read more

 

The Application of the Multi-Channel Analysis of Surface Waves (MASW) Seismic Method for Shallow Open Cut Coal Exploration

Get Report
C1702501/05/2009
Author: Koya Suto | Terra Australis Geophysica Pty Ltd

The Multi-channel Analysis of Surface Waves (MASW) is a recently developed seismic method to estimate S-wave velocity structure under the ground. It analyses the seismic waves in the frequency domain for the dispersion property of surface waves and estimates the distribution of the S-wave ....  read more

 

Tool for Rapid and Consistent Capture of Drill Core Observations

Get Report
C1503710/08/2007
Author: Renate Silwa, Peter Dean, George Poropat | CSIRO Exploration & Mining

Central to all geological characterization, including the interpretation of vast amounts of geophysical data are geological observations made on drill core and chips. Two factors that impede the quality and reliability of these observations are inconsistencies of visual observations ....  read more

 

Top of Coal Detection in a Rotary Air Blast Drill Rig

Get Report
C2406418/05/2017
Author: Enver Bajram, Long Giang, Joel Kok and Daniel Hudson | Mining3

Accurately detecting the approaching top of a coal seam prior to blasting is fundamental to efficient coal recovery.  Previous investigations by member mining companies reported a 66% reduction in coal dilution through disciplined and detailed overburden drilling and blasting practices. ....  read more

 

Towards 3D, Integrated P+PS Seismic Imaging of Coal Targets

Get Report
C1702927/07/2011
Author: Shaun Strong, Steve Hearn | Velseis

Compressional-wave (P-wave) seismic reflection is a valuable tool used throughout the coal industry, for exploration (mainly 2D reflection) and mine planning (3D). Shear-wave (S-wave) reflection presents interesting theoretical potential, but is more difficult to implement. Previous ACARP ....  read more

 

Utilising Hyperspectral Imagery Scanning for Geotechnical Characterisation

Get Report
C3403301/09/2023
Author: Katerina Savinova, Karina Barbosa, Sandra Rodrigues, Joan Esterle, Nick Cook | The University of Queensland

The project was undertaken to contribute to and improve the analysis and interpretation of data obtained from hyperspectral imagery for characterisation of the overburden material in open cut coal projects. In future geotechnical index parameters might be calculated with these in mind, along ....  read more

 

XCT Prediction of Breakage and Washability of Borehole Cores

Get Report
C2502701/03/2018
Author: Tuan Nguyen, Anh Nguyen, Chen-Luh Lin and Jan Miller | University of Queensland, University of Utah

The most critical parameters for the efficient design and planning of coal mining and processing operations depend on the accurate prediction of coal breakage and washability characteristics of the coal resources. The aim is to establish the most “effective” liberation of the coal ....  read more

 

Underground

Health and safety, productivity and environment initiatives.

Recently Completed Projects

C34019Longwall Bretby Cable Handling Monitoring With Fibre Optics

This project examined the potential of using fibre optic sensing tec...

C27049Mine Machine Radar Sensor Integration

The aim of this project was to develop an integrated radar sensor an...

C29007Innovative Coal Burst System To Investigate The Influence Of Confinement Loss And Pre-Conditioning On Coal Burst Mechanism

The challenges associated with designing and operating a safe and pr...

Underground

Open Cut

Safety, productivity and the right to operate are priorities for open cut mine research.

Recently Completed Projects

C33035High Water Recovery, Low Cost Desalination Using PV-Powered Membrane Capacitive Deionisation (Mcdi)

Capacitive deionization is a robust, energy efficient and cost effec...

C28035Topsoil Deficits In Site Rehabilitation Accelerated Transformation Of Spoils To Functional Soils

The incorporation of commercial biological amendments (compost, worm...

C34036Tyre Handler Testing Rig Stage 2: Lifting Trials

Tyre handling is a major source of risk in surface mining operations...

Open Cut

Coal Preparation

Maximising throughput and yield while minimising costs and emissions.

Coal Preparation

Technical Market Support

Market acceptance and emphasising the advantages of Australian coals.

Recently Completed Projects

C34060In-Situ Investigation Of Coke Structure Formation Under Stamp Charged Coking Conditions

Stamp charged cokemaking has emerged as an effective technique to im...

C34062Improving The Classification Of Microstructure Distribution In Coke CT Images Using Deep Learning And Lineal Path Calculations

This project builds on a number of earlier projects that have helped...

C29071Source Of Variability Of Reactivity Of Coke In The CSR Test

The Coke Strength after Reaction (CSR) test is used worldwide to det...

Technical Market Support

Mine Site Greenhouse Gas Mitigation

Mitigating greenhouse gas emissions from the production of coal.

Recently Completed Projects

C28076Selective Absorption Of Methane By Ionic Liquids (SAMIL)

This third and final stage of this project was the culmination of a ...

C29069Low-Cost Catalyst Materials For Effective VAM Catalytic Oxidation

Application of ventilation air methane (VAM) thermal oxidiser requir...

C23052Novel Stone Dust Looping Process For Ventilation Air Methane Abatement

This multi‐phase project is concerned with the mitigation of m...

Mine Site Greenhouse Gas Mitigation

Low Emission Coal Use

Step-change technologies aimed at reducing greenhouse gas emissions.

Recently Completed Projects

C17060BGasification Of Australian Coals

Four Australian coals were trialled in the Siemens 5 MWth pilot scale ga...

C17060AOxyfuel Technology For Carbon Capture And Storage Critical Clean Coal Technology - Interim Support

The status of oxy-fuel technology for first-generation plant is indicate...

C18007Review Of Underground Coal Gasification

This report consists of a broad review of underground coal gasification,...

Low Emission Coal Use

Mining And The Community

The relationship between mines and the local community.

Recently Completed Projects

C16027Assessing Housing And Labour Market Impacts Of Mining Developments In Bowen Basin Communities

The focus of this ACARP-funded project has been to identify a number...

C22029Understanding And Managing Cumulative Impacts Of Coal Mining And Other Land Uses In Regions With Diversified Economies

The coal industry operates in the context of competing land-uses that sh...

C23016Approval And Planning Assessment Of Black Coal Mines In NSW And Qld: A Review Of Economic Assessment Techniques

This reports on issues surrounding economic assessment and analysis ...

Mining And The Community

NERDDC

National Energy Research,Development & Demonstration Council (NERDDC) reports - pre 1992.

Recently Completed Projects

1609-C1609Self Heating of Spoil Piles from Open Cut Coal Mines

Self Heating of Spoil Piles from Open Cut Coal Mines

1301-C1301Stress Control Methods for Optimised Development...

Stress Control Methods for Optimised Development and Extraction Operations

0033-C1356Commissioned Report: Australian Thermal Coals...

Commissioned Report: Australian Thermal Coals - An Industry Handbook

NERDDC